KAMEN - USTM
KAMEN SH systems are compact hydraulic units designed for hydraulic separation of a heat source and two heating zones in accordance with PN-EN 12828.
Depending on the model, individual zones can be supplied with water at the temperature obtained at the outlet of the heat source (direct circulation, without stirring), or at a lower temperature obtained by stirring.
The Kamen USTT system is available in insulated and non-insulated versions:
Kamen USTM-NO | Non-insulated version. |
Kamen USTM-OC | Insulated version. |
The kit includes:
Kamen SH 1NA2-OC low loss header
– Thermostatic mixing valve ESBE 20-55 ° C Kvs3.4
– 3-way valve with actuator ESBE ARA 661
– 2 x Wilo 15/6 pumps
– 4 x bimetallic thermometers with 1-inch ball valve
– Automatic deaerator
– Drain valve
– 2 x Check valve (straight)
Complete set of hydraulic system with one heat source and two circuits:
• with thermostatic mixing valve ESBE 20-55 ° C Kvs3.4.
• with 3-way valve with ESBE ARA 661 actuator
Flow rate: 3.8 m3 / h Maximum power: 70 kW at ∆T = 15K
Parameters | Value |
Capacity | 2.8 l |
Maximum power | 70 kW |
Max. flow | 3.8 m3 / h |
Maximum pressure | 6 bars |
Maximum operating temperature | 110 ° C |
Low loss header | steel |