Kamen KomfortPell
Modern boiler with a patented “Kamen Fenix” automatic burner that ensures high combustion efficiency and minimal emissions. A large fuel hopper and convenient electronic controller ensure minimal maintenance requirements.
ADVANTAGES
- The boiler heat exchanger is covered by a warranty of up to 6 years.*
- The heat exchanger is made of 6 mm boiler-grade steel;
- Unique design;
- High efficiency;
- Automatic ignition and shutdown;
- Automatic ash removal;
- Power modulation;
- Heating system circulation pump control;
- Hot water cylinder circulation pump control (in summer, the system can be used for hot water production only);
- Underfloor heating control;
- Servo drive control;
- Temperature regulation based on the room thermostat;
- Temperature regulation based on the outdoor temperature sensor;
- Settings are retained after a power outage;
- Simple operation;
- Ethernet module connectivity;
- Large fuel hopper;
- The fuel hopper can be installed on either the left or right side;
- Rear flue connection (available as an additional option).
* Additional conditions apply.
The boiler warranty terms and conditions can be found here.
The KAMEN KomfortPell pellet boiler is a heating solution designed to meet your needs. Its innovative built-in burner and modern controller ensure minimal boiler maintenance. The boiler features a horizontal flue gas pass system, a well-insulated body, a large heat exchanger and other advanced technological solutions, achieving an efficiency of up to 93%.
The boiler is equipped with a stainless-steel “Kamen Fenix” burner, featuring an advanced combustion chamber design and an optimized air supply system that ensures even pellet combustion and significantly reduces emissions. Its exceptionally high thermal efficiency ensures maximum fuel utilization and provides real cost savings for the user.
The boiler body is manufactured from 6 mm thick 265 GH boiler-grade steel. All doors are made of steel and sealed with an environmentally friendly, high-temperature-resistant sealing material. The upper door is designed for boiler cleaning.
To reduce heat loss, the boiler is insulated with mineral wool and covered with powder-coated steel sheet. The fuel hopper can be installed on either the right or left side of the boiler.
The innovative “Fenix” burner allows the boiler to operate with minimal user intervention. The entire boiler operation is controlled by an advanced electronic controller developed using modern technology.
The “Fenix” burner is equipped with automatic ignition, and the boiler regulates heating according to the actual heat demand. Once the desired room temperature is reached, the boiler switches off automatically. If the room temperature falls below the set level, the burner automatically reignites (when a room thermostat is installed).
The “Fenix” burner offers a wide range of functions through its electronic controller. In addition, the burner is equipped with the “Full Clean” function.*
* The “Full Clean” function is an additional automatic mechanical ash removal system.
The boiler flow and return connections can be installed on either the left or right side of the boiler (available as an additional option).
Kamen KomfortPell technical details
Parameter | Unit | Value | ||||
Model | – | 10 | 15 | 20 | 26 | 34 |
Power range from min to max | kW | 3 – 10 | 4,5 – 15 | 6 – 20 | 7.8 – 26 | 10,2 – 34 |
Maximum power | kW | 10 | 15 | 20 | 26 | 34 |
Heat exchanger surface area | m2 | 1.2 | 1.7 | 2.2 | 2.7 | 3.4 |
Class according to PN-EN 303-5:2012 | – | 5 | 5 | 5 | 5 | 5 |
Energy efficiency class | – | A+ | A+ | A+ | A+ | A+ |
Maximum boiler width (A) | mm | 1280 | 1280 | 1350 | 1420 | 1420 |
Boiler width (A1) | mm | 480 | 480 | 550 | 630 | 630 |
Boiler width with fuel hopper (A2) | mm | 755 | 755 | 755 | 755 | 755 |
Maximum boiler depth (B) | mm | 680 | 760 | 760 | 760 | 850 |
Boiler depth with door (B1) | mm | 580 | 655 | 655 | 655 | 755 |
Fuel hopper depth (B2) | mm | 630 | 630 | 630 | 630 | 630 |
Boiler height (H) | mm | 1205 | 1205 | 1205 | 1205 | 1205 |
Supply water pipe height (H1) | mm | 1230 | 1230 | 1230 | 1230 | 1230 |
Height to the top of the flue (H2) | mm | 1260 | 1260 | 1260 | 1260 | 1260 |
Height to the centre of the flue when connected from the rear | mm | 1045 | 1045 | 1045 | 1045 | 1045 |
Chimney diameter (ØD) | mm | 159 | 159 | 178 | 178 | 178 |
Return water pipe height (H3) | mm | 155 | 155 | 155 | 155 | 155 |
Fuel hopper capacity | l l/kg | 325 ~200 | 325 ~200 | 325 ~200 | 325 ~200 | 325 ~200 |
Boiler weight | kg | 360 | 425 | 475 | 525 | 585 |
Water capacity | Ltr | 62 | 71 | 79 | 88 | 109 |
Thermal efficiency | % | 92,4 | ||||
Maximum working pressure | Bar | 1.8 | ||||
Supply water temperature (min-max) | C | 55 – 85 | ||||
Supply and return diameter | Inch | G 6/4 | ||||
Power supply | V/Hz | 230 / 50 | ||||
Chimney draft | Pa | 20 | 22 | 24 | 26 | 26 |
Min. chimney height | m | 6 | 7 | 7 | 8 | 8 |
Min. chimney diameter | mm cm x cm | 160 15×15 | 160 15×15 | 180 17×17 | 180 17×17 | 180 17×17 |
Heated area | m2 | Iki 130 | 130-200 | 200-260 | 260-340 | 340-450 |
Dimensions of the boiler
