TERMEK DUO UNI
Unique design, high efficiency solid fuel boilers with a fuel charge of up to 60 cm.
TERMEK DUO UNI 12-20 kW
TERMEK DUO UNI 27-50 kW
Advantages:
- The boiler heat exchanger is provided with up to 4 m. warranty.*
- High efficiency (over 82%).
- The heat exchanger is made of 6 mm boiler steel.
- Large fuel load (up to 60 cm. length depending on the model).
- Convenient and simple boiler cleaning.
- Convenient and easy ignition of the boiler.
- Mechanical cleaning of the boiler grate.
- The boiler can burn different types of fuel
- A long burning time is ensured by a large area of the heat exchanger and a large volume of fuel.
- Draft regulator, electronic control with fan**
Electronic controller functions: controls boiler temperature, fan speed, operation of two circulation pumps (central heating and DHW), fuel combustion parameters, etc.
* there are additional conditions
An electronic controller with a fan can be ordered additionally
Electronic controller functions: controls boiler temperature, fan speed, operation of two circulation pumps (central heating and DHW), fuel combustion parameters, etc.
TERMEK DUO UNI fuel:
- firewood with a length of up to 60 cm (depending on the model) and a moisture content of no more than 25%.
- wood or peat briquettes.
- coal.
The solid fuel water heating boiler “TERMEK DUO UNI” belongs to the series of tall boilers – it is a tested design with horizontal flue translation, which ensures high performance when the boiler is selected appropriately for the heated area. Due to its unique construction, the boiler is distinguished by a large area of the heat exchanger and a fuel charge up to 60 cm long (depending on the model). The boiler is equipped with a large fuel charge door, which makes it most convenient to burn firewood and other solid fuel in the boiler. Air enters the combustion chamber through the air damper installed in the lower door, which is manually adjusted using the draft regulator.
The heat exchanger of the solid fuel water heating boiler “TERMEK DUO UNI” is made of 6 mm thick special and fire-resistant boiler steel. All doors are made of steel and sealed with an ecological seal resistant to high temperatures. The upper door is for cleaning the boiler. In order to reduce heat loss, the boiler is insulated with mineral wool and covered with a powder-coated steel sheet.
Designed and manufactured in Ukraine.
Termek Duo Uni technical details:
TERMEK DUO UNI 12-20 kW
| Parameter | Unit | ||||
| Nominal boiler heating power | kw | 12 | 16 | 20 | |
| Heat transfer surface area | m2 | 1,2 | 1,4 | 1,8 | |
| Efficiency (fuel: coal) | % | ~86 | |||
| Fireplace dimensionss | depth | mm | 410 | 410 | 410 |
| width | mm | 245 | 290 | 290 | |
| capacity | dm3 | 39 | 47 | 68 | |
| The amount of water in the boiler | l | 59 | 63 | 71 | |
| Boiler weight | kg | 225 | 255 | 315 | |
| Chimney draft | Pa | 20-25 | |||
| Minimal recommended boiler water temperature | °C | 58 | |||
| Maximal boiler water temperature | °C | 85 | |||
| Maximum pressure | bar | 1,5 | |||
| Max power consumption (controller + fan) (TERMEK DUO UNI Plus only) | W | 85 | 85 | 85 | |
| Boiler dimensions | B | mm | 550 (610) | 590 (650) | 590 (650) |
| В1 | 430 | 470 | 470 | ||
| H | 1270 (1165) | 1290 (1185) | 1450 (1345) | ||
| H1 | 1050 | 1070 | 1230 | ||
| H2 | |||||
| L | 860 | 860 | 860 | ||
| L1 | 695 | 695 | 695 | ||
| Loading door dimensions | height (O) | mm | 210 | 210 | 210 |
| width (N) | mm | 245 | 290 | 290 | |
| Diameter of the chimney | mm | 159 | 159 | 159 | |
| Diameter of supply and return pipes | mm | 50 | 50 | 50 | |
| Recommended parameters of the chimney | Minimum chimney area | cm2 | 201 | 201 | 201 |
| Minimum chimney diameter | mm | 160 | 160 | 160 | |
| Minimum chimney height | m | 5 | 5 | 5 | |
| Connection diameter of safety valve (DN). | mm | 15 | 15 | 15 | |
| A safety valve pressure trigger value | MPa | 0,2 | |||
TERMEK DUO UNI 27-50 kW
| Parameter | Mat. vnt | |||||
| Nominal boiler heating power | kw | 27 | 33 | 40 | 50 | |
| Heat transfer surface area | m2 | 2,3 | 2,6 | 3,1 | 3,6 | |
| Efficiency (fuel: coal) | % | ~86 | ||||
| Fireplace dimensionss | depth | mm | 450 | 450 | 520 | 600 |
| width | mm | 320 | 370 | 370 | 370 | |
| capacity | dm3 | 77 | 97 | 122 | 140 | |
| The amount of water in the boiler | l | 92 | 105 | 120 | 135 | |
| Boiler weight | kg | 340 | 380 | 420 | 460 | |
| Chimney draft | Pa | 23-30 | ||||
| Minimal recommended boiler water temperature | °C | 58 | ||||
| Maximal boiler water temperature | °C | 85 | ||||
| Maximum pressure | bar | 1,5 | ||||
| Max power consumption (controller + fan) (TERMEK DUO UNI Plus only) | W | 85 | 85 | 85 | 85 | |
| Boiler dimensions | B | mm | 610 (680) | 660 (730) | 660 (730) | 660 (730) |
| В1 | 510 | 560 | 560 | 560 | ||
| H | 1545 (1390) | 1595 (1440) | 1645 (1490) | 1645 (1490) | ||
| H1 | 1325 | 1375 | 1425 | 1425 | ||
| H2 | 1170 | 1210 | 1260 | 1240 | ||
| L | 1050 | 1050 | 1120 | 1200 | ||
| L1 | 730 | 730 | 800 | 880 | ||
| Loading door dimensions | height | mm | 210 | 210 | 210 | 210 |
| width | mm | 320 | 370 | 370 | 370 | |
| Diameter of the chimney | mm | 159 | 178 | 178 | 219 | |
| Diameter of supply and return pipes | mm | 50 | 50 | 50 | 50 | |
| Recommended parameters of the chimney | Minimum chimney area | cm2 | 201 | 248 | 248 | 377 |
| Minimum chimney diameter | mm | 160 | 180 | 180 | 220 | |
| Minimum chimney height | m | 6 | 5,0 | 5 | 6 | |
| Connection diameter of safety valve (DN). | mm | 15 | 15 | 15 | 15 | |
| A safety valve pressure trigger value | MPa | 0,2 | ||||
Termek Duo Uni 12-20 kW dmensions
Katilo Termek Duo Uni 27-50 kW dimensions
Energy efficiency tables of the solid fuel boilers "TERMEK":
To ensure the durability of the product, the manufacturer is constantly improving its products and reserves the right to change the appearance, specifications, etc. of the Product without prior notice.